Hydraulic | P.T.O. |

Hydraulic Drive Compressors

Features and Benefits

pdf download Specs and information

PREDATAIR60 compressor system advantages:



  
Approximate total system dry weight is 150lbs.

One lightweight tank/separator, easy accessible filtration, two filters in tank.
Patented low profile modulating high flow inlet valve with air filter.

Integral hydraulic and compressor oil cooling system (no need for additional hydraulic oil cooler
if only cooling the compressor).
Easy installation.
Fast customer support.
Hundreds of customers surveyed to create the design specifications to ensure it meets the
demands of the user.

System testing:

Each system has been fully tested at various stages of production to ensure it meets air output requirements.

Features Benefits
100% Duty Cycle No Down Time  = Less time to complete the job = higher profits
 
Air on Demand

Save valuable time charging air-cylinder = Less time to complete the job = higher profits
 

Compact Design The PREDATAIR60 is the smallest and lightest 60 cfm hydraulic above deck air compressor on the market or the need to tow a trailer, or allow you to tow a trailer for other job site accessories.
 
Light Weight The PREDATAIR60 weighs only 150 lbs (dry).  Decreased payload increases the wear and tear of your vehicle while at the same time increases fuel economy.
 
Above Deck Mounted

When properly maintained, VMAC compressors should last for the service life of your vehicle.

No need for towable air compressors. Your competitor may not be able to tow a heavy trailered compressor to the job site. With your PREDATAIR compressor, if you can drive your truck to the site, you have air.

No additional vehicles or manpower required to tow auxiliary equipment.

Your truck hydraulic system powers the compressor. There are no additional engines to maintain or carry additional fuel for. Again saving you time, money and energy.

No impediments to mobility through traffic. You can be assured of a little more 'peace of mind' knowing that you or one of your staff are not trying to negotiate heavy traffic, park in precarious situations, and backup when space can be limited.

Reduced Vehicle Insurance Costs

Tow behind compressors are the target of thieves since the units can be stolen in minutes. You can feel confident that your investment in a PREDATAIR60 is safe.
 

No requirement for air receiver tank Vehicle efficiency is increased through weight reduction and in many cases aerodynamically where the tank is mounted in a location where additional drag (air turbulence) is created. PREDATAIR60 compressors allow for instant pressure of up to 60 CFM and 175 PSIG.
Cost VMAC Compressors cost less than tow behind compressors, cost less to maintain and also save money when considering the cost of trailer insurance, tire replacement, bearing maintenance, engine servicing, etc.


Applications

How are others using PREDATAIR systems?

Service Trucks:

 ½" - 1 ¼" impact wrenches
air grinders and sanders
air starters for large machinery
other pneumatic tools

Tire Service:

filling tires
pneumatic torque wrenches
air jacks
other pneumatic tools

Mining:

air starters for large machinery
½" - 1 ¼" impact wrenches
other pneumatic tools

Landscape Construction:

flushing sprinkler systems
other pneumatic tools

Railways:

track maintenance and repair vehicles
snow wands for switch clearance
1 ¼ impacts for tracks & switches
spike drivers & pullers
jackhammers
brake checks
other pneumatic tools

Light & Heavy Construction:

concrete breakers
jackhammers (up to 90 lbs.)
moles
other pneumatic tools

Mobile Mechanics:

welding systems (air gouging)
other pneumatic tools (impacts, grinders & drills)

Fire Apparatus:

compressed air foam systems
other pneumatic tools

Lube Trucks:

lube systems
other pneumatic tools

Public Utilities:

moles
opening & closing water valves
jackhammers (up to 90 lbs.)
air lines to aerial buckets
post pounders for signage and guardrails
grinders
snow wands
tires
sand blasting
tampers
other pneumatic tools


Viper Hydraulic

Typical Applications - Water Departments, Mining Industry, Pipeline Industry, Off-road Tire Service Truck.  Unit features a rotary screw compressor with varying air capacity.

40 to 85 cfm @ 100-150 psig.



Dimensions Std Pressure Models 40 cfm 60 cfm 70 cfm 85 cfm
Length 39.0" Air Pressure (psig) 100 100 100 100
Width 20.0" Hydraulic Flow Required (gpm) 13.5 16.5 18.6 22.5
Height 21.0" Hydraulic Pressure Required (psig) 2250 2250 2250 2300
Wt.   333 lbs          

Dimensions High Pressure Models 40 cfm 60 cfm 70 cfm 85 cfm
Length 39.0" Air Pressure (psig) 150 150 150 150
Width 20.0" Hydraulic Flow Required (gpm) 13.5 16.5 18.6 22.5
Height 21.0" Hydraulic Pressure Required (psig) 2700 2800 2850 2800
Wt.  333 lbs          


Comet Hydraulic

 Unit features a 2-Cylinder, Single-Stage Reciprocating Compressor with
a comprehensive start/stop system controlled by receiver tank pressure. Operating Pressure is adjustable up to 125 psig. Typical Applications - Tire Service Truck, Mechanic Service Truck, Lube Truck

COMET HYDRAULIC: 30 cfm @ 175 psig


Dimensions Comet Models 30 cfm
Length 32.5" Air Pressure (psig) 100 - 125
Width 17.75" Hydraulic Flow Required (gpm) 11.5
Height 21.75" Hydraulic Pressure Required (psig) 2300 psig @ 1300 rpm
Wt.   280 lbs    

Titan Hydraulic

Unit features a 4-Cylinder, 2 Stage Reciprocating Compressor with Finned Intercooler. Operating pressures are adjustable up to 175 psig. Typical Application - Tire Service Truck Mechanic Service Truck, Lube Truck

50cfm @ 175 psig


Dimensions Titan 50 Models 50 cfm
Length 32.3" Air Pressure (psig) 175
Width 26.5" Hydraulic Flow Required (gpm) 16.0
Height 26.75" Hydraulic Pressure Required (psig) 2300 psig
Wt.    380 lbs    


Tiger Hydraulic

Unit features a rotary screw compressor. No reservoir required. Typical Application - Tire Service Truck Mechanic Service Truck, Lube Truck

20-45 cfm @ 100-175 psig.

Dimensions Tiger Models 20 cfm 25 cfm 30 cfm
Length 35.75" Air Pressure (psig) 100 100 100
Width 19.5" Hydraulic Flow Required (gpm) 9.2 gpm 11.0 gpm 12.0 gpm
Height 21.3" Hydraulic Pressure Required (psig) 2400 psig 2375 psig 2400 psig
Wt. 250 lbs 

Dimensions Tiger Models 35 cfm 40 cfm 45 cfm
Length 35.35" Air Pressure (psig) 100 100 100
Width 19.5" Hydraulic Flow Required (gpm) 14.0 gpm 15.0 gpm 16.5 gpm
Height 21.3" Hydraulic Pressure Required (psig) 1450 psig 1500 psig 1500 psig
Wt. 250 lbs    

Dimensions Tiger Models 20 cfm 25 cfm 30 cfm
Length 35.75" Air Pressure (psig) 175 175 175
Width 19.5" Hydraulic Flow Required (gpm) 9.2 gpm 11.0 gpm 12.0 gpm
Height 21.3" Hydraulic Pressure Required (psig) 2400 psig 2375 psig 2400 psig
Wt. 250 lbs    

Dimensions Tiger Models 35 cfm 40 cfm 45 cfm
Length 35.35" Air Pressure (psig) 175 175 175
Width 19.5" Hydraulic Flow Required (gpm) 14.0 gpm 15.0 gpm 16.5 gpm
Height 21.3" Hydraulic Pressure Required (psig) 2510 psig 2620 psig 2620 psig
Wt. 250 lbs

CFM 20 25 30 35 40 45
Air Pressure 100 100 100 100 100 100
Hyd. Flow (GPM) 9.2 gpm 11.0 gpm 12.0 gpm 14.0 gpm 15 gpm 16.5 gpm
Hyd. Press. (PSI) 1400 psi 1375 psi 1400 psi 1450 psi 1500 psi 1500 psi

Viking Hydraulic

Unit features a rotary screw compressor which does not require an air reservoir. Typical Applications - Water Departments, Mining Industry, Pipeline Industry, Off-road Tire Service Truck.

40-65 cfm @100-175 psig

Dimensions Viking Models 40 cfm 50 cfm 60 cfm 65 cfm
Length 37.3" Air Pressure (psig) 100 100 100 100
Width 19.0" Hyd. Flow (gpm) 13.0 gpm 16.0 gpm 19.5 gpm 21.0 gpm
Height 26" Hyd. Press. (psig) 1150 psi 1275 psi 1275 psi 1375 psi
Wt. 280lbs.


Dimensions Viking Models 40 cfm 50 cfm 60 cfm 65 cfm
Length 37.3" Air Pressure (psig) 175 175 175 175
Width 19.0" Hydraulic Flow Required (gpm) 13.0 16.0 19.0 21.0
Height 26" Hydraulic Pressure Required (psig) 2200 2200 2200 1375
Wt. 280 lbs        


Gas Driven Viper

Unit features a rotary screw compressor powered by a Kohler gasoline engine. The Kohler engine is a 4 cycle, V-Twin, Overhead Valve, 25 H.P. unit with a fuel tank capacity of 5 gallons. This unit can be loaded and unloaded with relative ease from your pick-up.

Unit Dry Weight = 535 lbs.

Dimensions Gas Driven Viper Models 60 cfm 60 cfm 70 cfm 80 cfm 40 cfm Gen.
Length 42.0" Air Pressure (psig) 100 150 100 100 100
Width 33.0" Full Load Speed 3300 rpm 3300 rpm 3300 rpm 3475 rpm 3575 rpm
Height 29.5" Idle Speed 2600 rpm 2600 rpm 2600 rpm 2600 rpm 2600 rpm
  Genair Generator         5.2 kw