Accessories
Hose Reels
Spring Driven Hose Reels
The ideal reel for all general air applications. This hose reel incorporates contemporary engineering and 
manufacturing techniques to give trouble free performance. Reels are all steel construction and compact for applications with critical space requirements. All reels have a full flow shaft and swivel to assure maximum product delivery. These hose reels meet AIRTEK's specifications for trouble free use with UNDERHOOD, PREDATAIR and other air systems.
Spring Loaded Air Hose Reels
The open Hose Reel comes complete and is available in 50' x ½". This spring-loaded Hose Reel matches all compressed air requirements.
- 51 lbs (24kg)
- 300 psi
- 20 1/4" (H) X 19" (L) X 7" (W)
Air Receiver Tanks
35 Gallon Air Receiver wing tank
This ASME (American Society of Mechanical Engineers) certified Air Receiver Tank is the standard in the mobile compressed air industry.
- 95lbs (43kg)
- 73 3/4" (L) x 14" (W)
- 14" Diameter
- Each tank comes complete with fittings and a pressure gauge
The air receiver is used to meet heavy, short time demands of certain equipment. Typically, a rotary screw compressor is designed for 100% duty cycle and the use of a receiver is not needed for air demands.
There is always a difference between ambient and the discharge air temperatures. As soon as the warmer discharge air contacts the cooler steel walls of the tank, the moisture starts to condense out of the compressed air. This can reduce the amount of downstream moisture traveling to your tools. Use of an after-cooler, Filter-Regulator-Lubricator or air dryer will also remove moisture from the air.
The moisture condensing in the tank will need to be drained from time to time to prevent rust and scale deposits. These deposits may cause air blockage problems and damage components.
All applications can benefit by the installation of air receiver tanks. It is generally accepted that no receiver is too large for an application and no number of receivers are too many. The installation of either a vertical or horizontal tank depends on the physical space available.
Filter Regulator Lubricator
F.R.L. Filter Regulator Lubricator
The Filter Regulator Lubricator (F.R.L.) is designed to remove compressor lubricants, dirt and water from the air stream. The built in regulator can reduce the air pressure to extend the life of your tools. The lubricator adds atomized tool oil to the air stream to lubricate your pneumatic tools. If you need regulated, clean air for your tools, the F.R.L. is an effective component of your air system.
- 5 lbs (2.1 kg)
- 150 psi regulated pressure
- 200 psi maximum pressure
Heavy Duty Air Filter
Specifications at a Glance:
Air cleaner for moderate & moderate to heavy dust environment.
- Up to 80 CFM air flow
- 10 LBS (4.54 KG)
- Automatic dust removal
- 72" Flexible hose
Features & Benefits:
High efficiency with less restricting air cleaner for moderate to heavy dust.
- Light weight & compact design
- Easy installation and maintenance
- Automatic dust removal
- Pre-cleaner for longer filter life
- Horizontal application
Specifications:
| Mounting Method: | Bolts onto truck body or Equipment enclosure |
| Air Flow: | Up to 80 CFM |
| Weight (except air hose): | 10 LBS |
| Dimensions (except air hose): | 12"(H) X 6"(W) X 14"(L) |
| Environment Application: | A700136 - Moderate dust environment, typically industrial and off-road application (material handling and construction equipment) |
Air AfterCooler
ELIMINATOR70 Air AfterCooler
Airtek is proud to introduce the ELIMINATOR70 Air AfterCooler. This lightweight and compact system eliminates up to 80% of moisture from your air-lines and is rated for air systems up to 70 cfm. Equipped with a powerful 12 volt fan, a moisture filter assembly and housed in a compact package, the ELIMINATOR70 Air AfterCooler is the perfect compliment for your air compressor.
- Weighs only 35 lbs
- Measures 17.0” (l) x 8.0” (w) x 14.5” (h)
- Maximum air flow is 70 cfm