info@airteksystems.com

1(877) 452-9909

It’s off-roading season with Pull Pal!

airtek-systems-pull-pal-palo-duro-jeep-jamboree-2013-jeep-wrangler-off-road-04The snow has melted and it’s time to go off-roading! This is when the roughest terrain is to conquer. Make sure to pack your Pull Pal, perfect for those gravity-defying slopes when you find yourself spinning your wheels, literally.

This well-engineered anchoring tool is fully portable, compact and suitable for a variety of environments, like mud pits, muskeg and rocky mountainsides. It can be mounted inside or outside your vehicle, or stored in a custom carrying case. The Pull Pal is intended as a winching tool to get you out of sand and mud and get you up and over hill stalls, minimizing dangerous situations.

This unique tool is designed with physics in mind. The plow blade sets firmly in the terrain and as the winch tightens the blade imbeds deeper and frees your rig with the assistance of the wheel motion. This allows for more control even if you are off-roading alone.

The Pull Pal is made for winch-equipped Jeeps, buggies, campers, 2-wheel drive, 4WD SUVs, trucks, and Hummers. It is a “must have” tool for any off-road adventure enthusiast.

Get yours today at Airtek Systems.

Comments Off on It’s off-roading season with Pull Pal! In the World, News

Read more

THE READY WELDER: PORTABLE, POWERFUL AND VERSITILE!!

Airtek-systems-The-Ready-Welder

Making its debut in 1997, The Ready Welder has remained the most unique and sought-after portable welding unit on the market. With its copyrighted design and patented circuitry, it fills a market need that was previously unmet.

The Ready Welder has a wide range of applications because of its unparalleled versatility. It has the ability to weld aluminum, steel, stainless steel, as well as other weld-able metal or alloy. It can be used as a Spool Gun, powered by AC current when connected to a welding machine or as a stand-alone battery powered MIG welder.

A favorite amongst racecar enthusiasts, this is the go-to welder for race season!  Having a wide amperage range allows any user to weld very thin and thick metals, making it perfect for on-site repairs as well as building and modifying raceway vehicles.

The Ready Welder is now available at Airtek Systems. Call today to put yours on hold!

Comments Off on THE READY WELDER: PORTABLE, POWERFUL AND VERSITILE!! In the World, News

Read more

An Innovative “No Cost” Solution To Help The Beleaguered Gas Industry Meet New Regulations

Air Works Compressors is offering an innovative solution to gas producers that are struggling to remain afloat amidst record low gas prices along with environmental policies being put into place that will be almost impossible to implement without expensive changes in current production equipment.  In a good year, this would not be a an issue, but with the current black cloud of impending doom that gas production companies are facing financially due to world gas prices and environmentally due to proposed emission standards, it is impossible as cash reserves are quickly dwindling for most companies.

New bills are being introduced at congressional level that will establish new standards to reduce the waste of natural gas required during venting, flaring or industrial use.  The bills are also introducing a requirement for royalties to be paid on all gas removed from the earth including this “wasted” gas, that is currently non-metered. The Bureau of Land Management (BLM) is actively working on new rulings that will reduce venting and flaring of methane and VOCs as well, which has been proven to be a large factor in global warming and health concerns (currently being experienced in the Unita Basin in North East Utah).  Currently permits are issued without the requirement for royalties to be paid on wasted gas – this is changing in the very near future. Along with this, tough measures are being implemented that could ban flaring on new wells and require reductions in the amount of gas being flared, gas capture plans will be required if venting and emission standards for key equipment and operating procedures will have to be in place within two years of a bill’s passage.

Airworks Compressors Corp currently has multiple instrumentation air skids (Aurora Eco-System) on site in the USA (Wyoming) and Canada (Alberta) running 20-28 natural gas wells each using compressed air to operate instrumentation, diaphragm pumps and plunger lifts versus natural gas which then must be flared or vented as there is not enough pressure to reintroduce it back into the pipeline.  Initial findings are proving that BLM estimates of vented and flared gas are very low for these operations.  Using compressed air instead of natural gas in these operations also limits the need for costly LDAR programs that indicate gas leaks (very common in natural gas production) while allowing existing equipment to remain in place. Compressed air leaks are not problematic and do not require leak detection.  It must be noted as well that this is also the perfect product for off grid well sites as it can be solar or wind powered, thus requiring no interface with power utilities. The natural gas producers currently using this technology are impressed with the results – increased gas production as none is wasted and zero down time due to freezing issues.  The bottom line in is the natural gas stays in the pipeline and in today’s market, every cubic foot of gas that is able to be sold counts!

Airworks Compressors Corp has an innovative solution to get this technology into the market place. Knowing that it reduces gas waste and emissions and believing so strongly that this is the solution that will enable gas producers to meet new emission standards and to sell every cubic foot of gas produced, Airworks is prepared to work with gas producers to get this technology implemented, at no capital expense for the producer.  How? Airworks Compressors Corp will install and maintain the Aurora Eco-System at no charge, in return for a percentage of savings created by the previously wasted gas used in these operations.

Perhaps Darryl Weflen, President of Airworks Compressors Corp, says it the best “Innovation brought us to develop this product and it will take innovative solutions for companies to get through these times”.

Comments Off on An Innovative “No Cost” Solution To Help The Beleaguered Gas Industry Meet New Regulations In the World, News

Read more

Airworks Compressors Qualifies as an NTEA Verified Member

Airtek Systems would like to congratulate Airworks Compressors on qualifying as an NTEA Verified Member. The NTEA Membership Verification Program (MVP) recognizes distributors, manufacturers and upfitters for implementing quality business practices and demonstrating that steps are being taken to comply with specific government safety regulations.

Comments Off on Airworks Compressors Qualifies as an NTEA Verified Member In the World, News

Read more

Airworks Compressors Wins the Small Business of the Year 2011

Airtek Systems would like to congratulate Airworks Compressors Corp for being honored with the distinction of winning the Alberta Small Business of the Year Award for 2010.

Comments Off on Airworks Compressors Wins the Small Business of the Year 2011 News

Read more

Airworks Compressors Listed as the 25th Fastest Growing Company in Alberta

Airtek Systems would like to congratulate Airworks Compressors on being listed at #25 in Alberta Ventures Fast Growth 50, an annual list of the 50 fastest growing companies in Alberta. Airtek would also like to congratulate them on being listed as the #1 manufacturer on the list.

Comments Off on Airworks Compressors Listed as the 25th Fastest Growing Company in Alberta News

Read more

Airworks Compressors Wins the Small Business of the Year 2010

Airtek Systems would like to congratulate Airworks Compressors Corp for being honored with the distinction of winning the Alberta Small Business of the Year Award for 2010.

Comments Off on Airworks Compressors Wins the Small Business of the Year 2010 News

Read more