The Air N Arc® 300 Hydraulic ALL-IN-ONE Power System® features the innovation of being hydraulically driven, while still offering all the advantages of the Air N Arc® 300 engine drive system including a 40 CFM rotary screw air compressor, 300 AMP welder, 300 AMP 12V charger and 12V/24V booster, and 7 kW generator. Designed as a true two generator system, the Air N Arc® 300 Hydraulic allows simultaneous dual functionality such as welding and generator for lights for nighttime service. The system offers a small footprint for side pack or behind-the-cab mounting and is ideal for trucks with hydraulics already installed, such as crane trucks.
|
|
| Drive System: |
Open Center Hydraulic |
| Hydraulic Requirements: |
19 GPM @ 2800 PSI Multifunction/14.5 GPM @ 2500 PSI Single Function |
| Compressor Type: |
Rotary Screw |
| CFM Rating: |
40 CFM |
| Max Pressure: |
175 PSI |
| Generator Wattage: |
7 kW Peak – 6.8 kW Continuous, AC Power, 60 Hz, Single Phase, 120V and 240V Outlets |
| Welder Amperage: |
High Frequency DC Welding, 270 AMPs at 100% Duty Cycle CC: 40-300 AMPs Operating Range, CV: 15-30 Volts |
| Battery Charger/Booster: |
300 AMPs 12V/24V Boost, 50 AMP 12V Charge |
Unit Dimensions Foot Print (In.) – 48.7L x 21.0W x 30.9H
Dry Weight with Control Panel (Lbs.) – 621
Dimensions listed are not a complete representation of total space necessary. Please consult Vanair® for overall space and air requirements.
Product improvement is a continuing goal. Design and specifications are subject to change without notice or obligations.
Ratings above are approximate and are based on 120°F hydraulic fluid temperature. Add 400 PSI minimum to hydraulic requirements for hydraulic system peak pressure ratings. Machine hydraulic relief valve is set at 3200 PSI. Consult Vanair® for specific details. Do not weld with the electrode holder connected to the negative port and the work piece connected to the vehicle. Bodily harm and equipment damage may occur.
