Offer
Provide additional details about the offer you're running.
FLASHSALE
Industrial focus
Rotary screw, oil-free and industrial reciprocating compressor systems.
Gardner Denver Compressor Repair
Independent industrial compressor service · Edmonton
Gardner Denver Compressor Repair
Practical diagnosis, repair and maintenance for industrial Gardner Denver compressed-air equipment. Airtek supports Edmonton and Central Alberta as an independent service provider.
Edmonton based
Shop and field-service options for Edmonton and communities across Central Alberta.
Current + legacy
Support assessed by model, serial number, condition, documentation and parts availability.
Gardner Denver service in Edmonton
Start with the machine in front of us.
No generic parts guessing.
Model, serial number, configuration and operating history come first.
Gardner Denver’s industrial compressor catalogue spans small packaged rotary screws, large fixed- and variable-speed systems, oil-free scroll and screw technology, and long-running reciprocating families. The name on the cabinet is only the beginning of a useful diagnosis.
Airtek evaluates the complete compressed-air system: what the controller is reporting, how the compressor loads and unloads, whether it is cooling and separating correctly, and what the plant is demanding from it. That gives your team a clear repair path instead of a reset-and-wait approach.
For legacy equipment, we confirm identification and parts options before setting expectations. For specialized oil-free or large-horsepower packages, service scope is reviewed against the exact machine and fault.
System-first diagnosis
Repair the fault. Verify the system.
A compressor problem can begin inside the package or elsewhere in the air system. The repair should address the evidence, not just the alarm that stopped the machine.
What informs the diagnosis
- Model, serial number, hours and package configuration
- Governor, variable-speed drive or other controller alarms
- Operating pressure, temperature and load/unload behaviour
- Fluid condition, separator performance, cooling and ventilation
- Leaks, pressure loss, downstream demand and air-treatment condition
- Maintenance records, recent changes and the operator’s observations
Equipment families
Gardner Denver compressors we assess
The model references below help identify the equipment—not promise a one-size-fits-all repair. Airtek confirms service scope and parts availability from the machine’s nameplate and condition.
L-Series + LRS-Series
Fixed-speed L-Series and variable-speed LRS packages cover a broad range of industrial plant-air duties. Diagnosis can include cooling, inlet and blowdown control, separator performance, drive components, electrical systems and controller-reported faults.
Family references: L04–L290; L07RS–L290RS; base-, tank- and AirStation-style configurations where equipped.
Electra-Saver + EAS
Electra-Saver, Electra-Saver II and Electra-Saver II G2 machines remain important names in North American compressor rooms. EAS fixed- and variable-speed models add another Gardner Denver rotary screw platform that must be identified accurately before repair planning.
Family references: Electra-Saver; Electra-Saver II; Electra-Saver II G2; EAS fixed-speed and variable-speed packages.
EnviroAire + PureAir + Ultima
Oil-free packages serve applications where compressed-air quality is central to the process. Service planning must respect the machine’s specific compression technology, cooling arrangement, controls and air-quality requirements.
Family references: EnviroAire S and ES scroll; EnviroAire VS, T and TVS screw; PureAir T/TVS; Ultima U75–U160.
Packaged piston compressors
Industrial reciprocating systems have different wear, valve, unloader, pressure-control and duty-cycle considerations than rotary screw packages. Airtek assesses the pump, drive, controls, receiver and connected system together.
Family references: A-Series, PL-Series, R-Series, Reward, RV-Series, VP-Series and Paradox industrial packages.
This is not an exhaustive model list. Older or less common equipment can be reviewed from nameplate photographs, available manuals and service history.
A faster service intake
Send the useful details first.
A few specific details help Airtek identify the machine, understand the fault and prepare for the service conversation.
- Clear photo of the full nameplate
- Alarm text, code or controller photo
- Operating hours and known service history
- What changed, when it happens and what the machine does
Common service calls
Symptoms worth investigating
These symptoms can have more than one cause. The correct repair follows testing, equipment identification and review of the operating conditions.
High discharge temperature
Temperature warnings, hot running or repeat shutdowns can point to cooling, fluid, airflow or operating-condition problems.
Low or unstable pressure
Slow pressure build, falling plant pressure or an inability to meet demand requires package and system checks.
Oil carryover or fluid loss
Oil downstream, rapid fluid loss or separator concerns should be traced before replacing components by assumption.
Load/unload problems
Failure to load, unload or hold a stable control band may involve valves, solenoids, signals, settings or system demand.
Controller or drive faults
Governor alarms, variable-speed drive trips and sensor faults need the exact code and machine context.
Noise or vibration
New mechanical noise, belt movement, fan contact or vibration should be assessed before damage progresses.
Wet or contaminated air
Moisture and air-quality complaints can involve the compressor, drains, dryers, filters or the downstream system.
Reciprocating start or pump issues
Hard starting, knocking, poor recovery or excessive cycling calls for pump, unloader, valve and control checks.
The repair process
Four steps from symptom to next move
Capture the facts
We identify the compressor and record the fault, alarm history, symptoms and operating context.
Diagnose the system
We test the relevant mechanical, electrical, control and compressed-air functions.
Define the repair
Airtek explains the findings, confirms parts or service options and provides a clear next step.
Repair and verify
Approved work is completed and the affected operation is checked before the job is closed.
Gardner Denver repair FAQ
Before you book
Still working through the problem? Call 780-452-9909 or send the machine details to info@airteksystems.com.
Which Gardner Denver compressors can Airtek assess?
Airtek assesses industrial Gardner Denver rotary screw, oil-free and reciprocating compressors, including current and legacy equipment. The exact service scope depends on the model, serial number, condition, documentation and parts availability.
Can Airtek work on older Electra-Saver compressors?
Older Electra-Saver and Electra-Saver II machines can be reviewed. Send the complete nameplate, controller information, photographs and known service history so Airtek can identify the package and investigate realistic parts and repair options.
Do you offer on-site Gardner Denver compressor repair?
Yes. Many industrial compressors are impractical to move, so field service is available when appropriate. Some components or smaller packages may be better handled at Airtek’s Edmonton shop. The team will confirm the best approach during intake.
What should I send with a service request?
Start with a clear photo of the machine nameplate, the full alarm text or code, operating hours, a description of the symptom and any recent service or operating changes. Photos of the controller and the overall installation are also useful.
Can you diagnose Governor controller or variable-speed drive faults?
Airtek can assess controller- and drive-related symptoms as part of the compressor system. Diagnosis begins with the exact alarm, machine configuration and operating conditions; it does not assume that the controller or drive itself is the failed component.
Can Airtek source Gardner Denver maintenance and repair parts?
Airtek can investigate service-part and repair-component options using the model and serial number. Availability varies by family, age and component, so fitment and lead time are confirmed before parts are promised.
How do I decide between repair and replacement?
The useful comparison considers the fault, machine condition, parts availability, operating efficiency, air demand and the cost of further downtime. Airtek can document the service findings so you can make that decision with the actual equipment condition in view.
What area does Airtek serve?
Airtek is based in Edmonton and supports industrial compressor customers across Edmonton and Central Alberta. Contact the service team with your site location and equipment details to discuss travel and scheduling.
Keep the air on.
Put the problem in front of a compressor technician.
Send the model, serial number and fault details to Airtek Systems in Edmonton. We’ll review the machine and help define the next practical service step.
Testimonials
"Their commitment is unmatched, and their sales approach is outstanding ... Their dedication and care truly set them apart, delivering the best service one could ask for."
"Great folks ... they rose to the occasion and got it completed and back in the field. Will gladly recommend to all my industry contacts and colleagues!"
"I have been very happy with my experience dealing with Airtek systems for the past year. They are always very fast to help me with any issues I come across, minimizing downtime and increasing productivity."